17th International Coating Science and Technology Symposium(2014)
| Monday Sep 8, 2014 | Tuesday Sep 9, 2014 | Wednesday Sep 10, 2014 |
Tuesday September 11, 2014 SessionsCoating Process FundamentalsSession Leaders:
Randall Schunk, University of New Mexico and James Gilchrist, Lehigh University
Randall Schunk, University of New Mexico and James Gilchrist, Lehigh University
| Direct Thickness Measurement of Doctor-Bladed Liquid Film on Gravure Roll Surface Hidenobu Miura and M. Yamamura Kyushu Institute of Technology |
| Visualization Study of Flow Stability in Two Layer Reverse Roll Transfer Masato Sasaki, JFE Steel Corporation, Wieslaw J. Suszynski and Lorraine F. Francis, Department of Chemical Engineering and Materials Science, University of Minnesota, Marcio S. Carvalho, Department of Mechanical Engineering Pontificia Universidade Catolica do Rio de Janeiro |
| Web-Fluid Interactions During Printing and Coating Harrison Gates and Doug Bousfield, University of Maine/font> |
| Toward an Understanding of Electrostatic Assist: Electrohydrodynamic Deformation of Thin Liquid Films Near Surfaces With Topography Aruna Ramkrishnan and Satish Kumar, University of Minnesota |
| Structural Mechanics of Roll-to-Roll Nanoimprint Lithography Kristianto Tjiptowidjojo and P. Randall Schunk, University of New Mexico |
| Multi-Phase Flow Model of the Jet-and-Flash Imprint Lithography (J-FIL) Process Andrew Cochrane, Kristianto Tjiptowidjojo and P. Randall Schunk, University of New Mexico, Akhilesh Jain and Roger T. Bonnecaze, University of Texas at Austin |
| Numerical Simulation of the Dip Coating Process with Wall Effects on the Coating Film Thickness Mahyar Javidi Soufiani, Andrew N. Hrymak, Western University |
| Nanostructure and Properties of Solution Processed Oxide Semiconductor Films for Thin Film Transistors or Transparent Conductive Electrodes Yoshiko TSUJI, Naoya TSUTSUMI, Katsutoshi MORIYA and Yukio YAMAGUCHI , The University of Tokyo |
| Analysis of Geometric Modeling of Slot Die Lips Naoki Rikita, Mitsubishi Materials Corporation RYOTEC |
Solidification and Microstructure DevelopmentSession Leaders:
Wilhelm Schabel, Karlsruhe Institute of Technology and Masato Yamamurs, Kyushu Institute of Technology
Wilhelm Schabel, Karlsruhe Institute of Technology and Masato Yamamurs, Kyushu Institute of Technology
| New Concept of a Batch Drying Unit Using a Comb Nozzle Structured Array of Impinging Jets Philipp Cavadini, Wilhelm Schabel and Philip Scharfer, Karlsruhe Institute for Technology, Benjamin Schmidt-Hansberg and Christian Eichholz, Institute of Thermal Process Engineering, Thin Film Technology (TFT), Karlsruhe Institute of Technology (KIT) |
| The Effect of Film Thickness on the Depth-Wise Chain Orientation of Rigid Rod-Like Polyimide Byoung Wook Jo and Kyung Hyun Ahn, Seoul National University |
| Self-Assembly of Conjugated Molecules in Drying Solution Coatings Yuta Amano and Masato Yamamura, Kyushu Institute of Technology |
| Freezing of Supercooled Water Drops on Cold Solid Substrates: Initiation and Mechanism H. Pirouz Kavehpour, UCLA, Stephen H. Davis, Department of Engineering Sciences and Applied Mathematics, Northwestern University |
| Investigating the Influence of Particle Morphology on the Performance of Core-Shell Latexes Kyle Price, University of Minnesota, Wenjun Wu, Arkema, Inc., Kurt Wood, Arkema, Inc., Stephanie Kong, University of Minnesota, Alon McCormick, University of Minnesota, Lorraine Francis, University of Minnesota |
| Microstructure and Performance of Block Copolymer Modified Epoxy Coatings Tuoqi Li, Frank S. Bates and Lorraine F. Francis, University of Minnesota Twin Cities |
| Experimental Investigation on Multicomponent Mass Transport During Drying of Ternary and Quaternary Polymer Solutions David Siebel, Wilhelm Schabel and Philip Scharfer, Karlsruhe Institute of Technology |
| Numerical and Experimental Investigation of the Heat Transfer Coefficient Distribution Under Arrays of Impinging Jets With Local Removal of the Spent Fluid Philipp Cavadini, Philip Scharfer and Wilhelm Schabel, Karlsruher Institue for Technology |
| Numerical and Experimental Investigation of the Flow Field in Thin Films During Drying Under Impinging Jets Philipp Cavadini, Philip Scharfer and Wilhelm Schabel, Karlsruher Institute for Technology |
Flow and Solidification of Particulate CoatingSession Leaders:
Doug Bousfield, University of Maine and Len Schwartz, Department of Mechanical Engineering, University of Delaware
Doug Bousfield, University of Maine and Len Schwartz, Department of Mechanical Engineering, University of Delaware
| Forced Spreading and Evaporation of Films and Droplets of Colloidal Suspensions Leonardo EspÃn and Satish Kumar, Dept. of Chemical Engineering and Materials Science, University of Minnesota |
| Deposition of Non-Templated Cubic Colloidal Crystals Midhun Joy, Tanyakorn Muangnapoh, Mark A. Snyder, and James F. Gilchrist, Lehigh University |
| Direct Numerical Simulation of the Dynamics of Colloidal Particles With Adsorptive Solute Transport O. Koike, Y. Yamaguchi and Rei Tatsumi, The University of Tokyo |
| Mode Transition of Condensed Colloidal Solutions Under Shear Flow Yukio Yamaguchi and Osamu Koike, The University of Tokyo |
Coating Application ProcessesSession Leaders:
Professor Hadj Benkreira, School of Engineering, University of Bradford and Ta-Jo Liu, Department of Chemical Engineering, National Tsing Hua University
Professor Hadj Benkreira, School of Engineering, University of Bradford and Ta-Jo Liu, Department of Chemical Engineering, National Tsing Hua University
| Intermittent Slot Die Coating of Low Viscous Soulutions Ike de Vries, Holst Centre/TNO |
| New Intermitting Concepts for Slot Die Coating of Li-Ion Battery Electrodes Marcel Schmitt, Philip Scharfer, Ralf Diehm and Wilhelm Schabel, Karlsruhe Institute of Technology (KIT), Institute of Thermal Process Engineering, Thin Film Technology (TFT) |
| Intermittent Coating Mark Miller, Coating Tech Slot Dies |
| Multilayer Slot Coating – First Experiences With Battery Slurries Harald Doell, TSE Troller AG |
| Multilayer Slot Die Coating of Li-Ion Battery Electrodes Marcel Schmitt, Philip Scharfer and Wilhelm Schabel, Karlsruhe Institute of Technology (KIT), Institute of Thermal Process Engineering, Thin Film Technology (TFT) |
| Analytical Prediction of the Behavior of Multiple Roll Coaters With Counter-Rotating Deformable Rolls Bettina Willinger, Isabell Vogeler and Antonio Delgado, Institute of Fluid Mechanics, FA University Erlangen-Nuremberg |
| Reverse Roll Coating at Negative Gaps: Model and Supporting Data Hadj Benkreira, School of Engineering, University of Bradford, Yusuke Shibata, School of Engineering, University of Bradford and Films R &D Center, Katsuya Ito, Films R &D Center |
| Slot Die Coating of Silver Nanowires Solutions to Make Transparent Conductive Films Ta-Jo Liu, Department of Chemical Engineering National Tsing Hua University |
| Analysis of Transparent Conductive AgNw Film by Dip Coating Flow Kwangguk Ahn, Onyu Kim, Dongjae Kim and Jaewook Nam, Sungkyunkwan University |
Printing and Discrete CoatingSession Leaders:
Yukio Yamaguchi, The University of Tokyo and Mikhaill Pekurovsky, 3M Corporate Research Process Lab
Yukio Yamaguchi, The University of Tokyo and Mikhaill Pekurovsky, 3M Corporate Research Process Lab
| In-Line Measurement of Velocity Synchronization Between Contact Surfaces in Offset Printing Dongwoo Kang, Hyunchang Kim, Eonseok Lee, Seunghyun Lee, Young-Man Choi and Taik-Min Lee, Korea Institute of Machinery and Materials |
| Contact Angle and Inertia Effects on the Instability of Partially Wetting Liquid Rivulets. Finite Element Analysis Sebastian Ubal, Diego M. Campana,Mar´ia D. Giavedoni, Fernando A. Saita, INTEC UNL-CONICET and Paul Grassia,The University of Manchester |
| A Comparative Study on the Behaviour of Coated and Inkjet Printed Photo-Responsive Textiles for Conventional and High-Tech Applications Shah M. Reduwan Billah, Durham University |
| Three Dimensional Numerical Simulations of the Liquid Transfer Between a Cavity and a Moving Roll Diego M. Campana, Sebastián Ubal, Maria D. Giavedoni, Fernando A. Saita, INTEC-CONICET and Marcio S. Carvalho, PontifÃcia Universidade Católica do Rio de Janeiro |
| Optimization of Aerosol Jet Printing for High Resolution, High Aspect Ratio Silver Ankit Mahajan, C. Daniel Frisbie, and Lorraine F. Francis, University of Minnesota |
GENERAL POSTER SESSION: POSTER PRESENTATIONS
| Monday Sep 8, 2014 | Tuesday Sep 9, 2014 | Wednesday Sep 10, 2014 |